The GReddy valve springs for high revs become necessary when GReddy Pro camshafts are used. Unnecessary friction is controlled by using moderate spring rate adjusted to cam profile. In addition heat resistance is high by using the SWCO-V silicon chrome, whose wear is little to the material. Reliability for the valve springs is high even from the durability and the efficiency aspects. ...
Skunk2 is proud to introduce its Alpha Valve Spring and Titanium Retainer Kits for Hondas B-series VTEC and K-series engines. Each kit includes Skunk2s high-quality dual valve springs and race-proven titanium retainers that are the result of nearly two decades of racing and engine building experience. Each Alpha Valve Spring is manufactured exclusively from super-clean, chrome-silicone wire ...
Skunk2 Alpha Series valves are manufactured from HNV3 martensitic steel (IN) and EV8 austenitic steel (EX) one-piece forgings, and each valve is heat-treated using a proprietary process for extraordinary strength and durability. Alpha Series Valves feature hard chrome plating and fully machined valve heads. Other valves may appear similar, but only Alpha Series Valves feature specially designed ...
Skunk2 is proud to introduce its Lost Motion Assembly Kits for Hondas B-series VTEC engines. Skunk2 Lost Motion Assemblies will fit any B-Series DOHC VTEC engine (Type-R/GSR B16A, B17A, B18C). The Skunk2 Lost Motion Assembly is an advance spring device that is designed to put pre-load on the center portion of the VTEC rocker when it is in the unlocked position (when VTEC mode is disabled). During ...
Skunk2 designs, develops and tests all valvetrain components in-house to ensure the highest quality and greatest performance gains. During development, all valvetrain components are tested in engines both on the dyno and on the road. Manufactured from the best materials available, Skunk2 valvetrain components provide exceptional performance, reliability, and quality. Skunk2 valvetrain components ...
Skunk2 has done it again with our 7075 CNCd Aluminum Roller Rocker arms designed for the Honda/Acura K Series engines. The Skunk2 Ultra Series Rocker arms replace the heavy factory steel rocker arms and eliminate VTEC making them perfect for drag and road racing. The rocker arms feature 7075 Aerospace grade aluminum construction for lighweight, CNC machined for precision fit and finish, heat ...
Skunk2 Ultra Series valves are our premium line valves manufactured from HNV3 martensitic steel (IN) and EV8 austenitic steel (EX) one-piece forgings. These characteristics of the austenitic nickel based alloy enable high resistance to oxidation and corrosion and are designed for engines that output extremely high temperatures. Ultra Series Valves are heat-treated using a proprietary process for ...
BLOX Racing Retainers are CNC-machined from the highest quality titanium available on the market. These Ti retainers are machined to exact specifications and help reduce the overall weight of the valvetrain area. As a direct result of the reduced weight, RPM?s are increased. Each retainer provides assurance from premature wear associated with high RPM?s and mileage. Install with BLOX Racing valve ...
BLOX Racing Valve Springs are wound using super clean, chrome silicone alloy. These valve springs are designed and engineered for both high performance street driving and all-out racing conditions. Each set provides maximum lift while preventing valve float and helps counter the effects of spring surge. These are perfect for naturally-aspirated and forced-induction engines. Easy installation, no ...
BLOX Racing Valve Springs are wound using super clean, chrome silicone alloy. These valve springs are designed and engineered for both high performance street driving and all-out racing conditions. Each set provides maximum lift while preventing valve float and helps counter the effects of spring surge. These are perfect for naturally-aspirated and forced-induction engines. Easy installation, no ...
BLOX Racing Valve Springs are wound using super clean, chrome silicone alloy. These valve springs are designed and engineered for both high performance street driving and all-out racing conditions. Each set provides maximum lift while preventing valve float and helps counter the effects of spring surge. These are perfect for naturally-aspirated and forced-induction engines. Easy installation, no ...
BLOX Racing Valve Springs are wound using super clean, chrome silicone alloy. These valve springs are designed and engineered for both high performance street driving and all-out racing conditions. Each set provides maximum lift while preventing valve float and helps counter the effects of spring surge. These are perfect for naturally-aspirated and forced-induction engines. Easy installation, no ...
BLOX Racing Valve Springs are wound using super clean, chrome silicone alloy. These valve springs are designed and engineered for both high performance street driving and all-out racing conditions. Each set provides maximum lift while preventing valve float and helps counter the effects of spring surge. These are perfect for naturally-aspirated and forced-induction engines. Easy installation, no ...
Skunk2 is proud to introduce its Pro Series XP (Extra Pressure) Racing Valve Spring Kits for Hondas B-series VTEC and K-series i-VTEC engines. Each kit includes Skunk2s high-quality race-proven dual valve springs that are the result of nearly two decades of racing and engine building experience. XP features a higher seat pressure for turbocharged and extreme high RPM motors. This spring has a ...
Skunk2 is proud to introduce its Viton Valve Stem Seals for popular Honda engines. Skunk2s Viton Valve Stem Seals are designed to provide exceptional lubrication while keeping oil out of the combustion chamber. Only Viton is able to provide precise oil control and maximum durability, even at high rpm. Unlike OEM Honda valve stem seals that use different materials for both intake and exhaust seals, ...